Metallurgical and petroleum coke materials used as conductive packing medium to surround the carbon products or as resistor medium in electric graphitizing furnaces are compared to natural graphite, scrap electrodes and usually used calcined and graphitized petroleum coke carbon raisers, under laboratory and plant trials conditions. Carbon recovery and dissolution rate, specific sulphur increasing, slag generation, chilling tendency, shrinkage occurrence etc, are considered in cast irons production. The parameters of cooling curves are connected to graphite morphology, metal matrix make-up and chilling sensitiveness of carburized cast irons. Recovered granular carbonic materials, previously used as conductive or resistor medium were found as potential carbon raisers with visible inoculation effects in cast irons, depending on their origin (petroleum or metallurgical coke). Specific characteristics of these products and their application fields are presented (as advantages and limits), compared to conventional calcined and graphitized petroleum coke, especially in grey irons production.
Full paper (PDF)
PDF · 202.21 KB · Document in English
The full paper is available to members of the institute only.
Log in to downloadDetails
AuthorsM. Chisamera, I. Riposan, S. Stan, V. Constantin, C. Diaconu
Organisation*POLITEHNICA University of Bucharest; **ELECTROCARBON Slatina, Romania
Event67th World Foundry Congress
TopicEngineering
Document languageEnglish
Year2006