In the foundry industry, the price of coke rose greatly as well as the inflationary prices of a recent raw material in these 1 or 2 years. As a result, it is greatly influenced that the manufacturing cost increases, the decrease in the competitive edge of the product and the decrease in rate of profit.
Therefore, it is required to use a cheap material to decrease the ratio of coke even a little. So far, it has been much reported that the cheaper smokeless coal or inferior coke is used. However, these inferior materials can cause trouble in casting defect and in cupola operation. In this study, it paid attention from effective use of the earth resource and the viewpoint of environmental problems to a woody biomass. There are advantages to use the woody biomass that it is easy in the global environment because of the manufacture cost reduction and control of generation of carbon dioxide.
Therefore, it is investigated to make the woody biomass a coke substitution material that manufacturing condition to make the carbonizing woody biomass like briquette, the material characteristic and the combustion process.
As a result, the compression stress of the carbonizing woody biomass is 100 MN/m2. This value is very hard compared with compression stress 18.7 MN/m2 of the foundry coke. The calorific density of the carbonizing woody biomass is 21.0 MJ/kg against calorific density 28.9 MJ/kg of coke. This value is an enough calorific value to alternate the coke. In fact, coke and the carbonizing woody biomass were burnt in the carbon crucible. As a result, the heat temperature of the woody biomass is equal to coke in the carbon crucible.