Dependable protection of the induction coil against overheating and, the more so, against contact with molten metal is of vital importance for ensuring safe and reliable operation of an induction furnace. Addressing this requirement, various technical solutions for monitoring the refractory crucible condition were proposed and implemented in the past but an optimum solution has not been found as yet.
The present paper describes the development and use of a totally new temperature measuring and monitoring system. The new system uses fibre-optical sensors which are particularly suitable for interference-free crucible monitoring in induction melting furnace applications, and provide direct and independent temperature field measurement in the immediate vicinity of the induction coil.
Following months of experiments in the test bay during which all minor problems were duly identified and remedied, long-term tests were conducted in several furnaces under production conditions.
The result can be summarised as follows: Crucible cracks and erosion are detected and localised reliably and precisely and normal refractory wear is under close control.