Natural molding sand with a grain spectrum of 0.5 to 2.0 mm is used for aluminium casting, particularly if the surface of the castings is required to meet high standards. But the processes of molding and aluminium casting cause the formation of hardened agglomerates in the natural sand. This is particularly challenging for the solids mixer, because the agglomerates need to be disintegrated first, before all solid components can be homogenized by distributive mixing and get wet with water. The paper presents a new preparation concept developed for a producing aluminum foundry. By means of tests on laboratory scale a concept is developed for a system that yields a higher throughput rate with optimized mixer operation.
An up-to-date control system for the mixer optimizes the preparation process, while keeping the energy input constant under changing material and machinery parameters.