National representative in the World Foundry Organization

Technical library ·

Effect of grain refinement on the mechanical properties of magnesium and its alloys

Yun Sung Han

Abstract

The majority of magnesium components is generally used in the automotive and electronic industries by conventional casting process. However, there is a strong need to develop high strength casting alloy for wide-spread application of Mg alloys. The present study was carried out to investigate the influence of Al-3%Ti-0.15%C and Al-5%Ti-1%B master alloys on the grain structure and mechanical properties of high purity magnesium, Mg-9Al-1Zn and Mg-6Al-0.35Mn alloy. It has been found that grain refinement was successful when using small addition of Al-3%Ti- 0.15%C and Al-5%Ti-1%B master alloy on the AZ91D and AM60B alloy. The tensile strength and yield strength of AZ91D and AM60B alloys were increased with Al-3%Ti-0.15%C and Al-5%Ti-1%B master additions. However, mechanical properties of both alloys were decreased with 0.3w.%Ca addition.