National representative in the World Foundry Organization

Technical library ·

Effectiveness of Zn-Ti based refiner of Al and Zn foundry alloys

W. K. Krajewski, A. L. Greer, J. Zych and J. Buraś

Abstract

The presented work is devoted to structural characteristics and performance of the new family of grain-refiners, based on the Zn-Ti system. The system studied was Zn-25wt%Al alloy (ZnAl25), Al-20wt%Zn alloy (AlZn20), Zn-4.6wt%Ti master alloy (ZnTi4 MA), ZnAl-4 wt%Ti (ZnAl-Ti4 MA) as well as the traditional refiners Al-5wt%Ti-1wt%B (AlTi5B1 MA) and Al-3wt%Ti-0.15wt%C (AlTi3C0.15 MA). SEM (scanning electron microscopy), LM (light microscopy) and TA (thermal analysis) investigations showed high effectiveness of the ZnTi-based master alloys as refiners of the inoculated with them AlZn20 and ZnAl25 alloys. The obtained structure refinement is comparable to those obtained after addition of the traditional AlTi5B1 MA or AlTi3C0.15 MA. The initial examinations of the damping properties showed, that attenuation coefficient of the refined AlZn20 alloy decreases together with increased structural fineness of the inoculated alloy.