National representative in the World Foundry Organization

Technical library ·

Effects of process parameters on the morphology of TiAl3 particle during the production of Al-Ti-B master alloy by flux reaction

Min Ryou, Sang-Ho Choi and Myung-Ho Kim

Abstract

The effect of process parameters, such as reaction temperature and holding time, on the microstructure of Al-Ti-B master alloy had been studied by using SEM/EDS and EPMA. The flux reactions between K2TiF6, KBF4 and molten aluminum were carried out at various temperatures and holding times. The results indicated that the morphology of TiAl3 particles in master alloy was strongly influenced by reaction temperature and holding time. The TiAl3 particles with blocky type which was known as an effective refiner were observed at lower reaction temperature and in shorter holding time, whereas finer TiB2 particles were found to be distributed uniformly independent of the reaction temperatures. The size of TiAl3 particles in the master alloy was significantly increased with increasing of the reaction temperature, and the increased temperature resulted in the change of the morphology of TiAl3 particles from blocky to plate-like type. The TiAl3 particles with morphology of blocky type shows longer fading time compare to the plate-like type.