National representative in the World Foundry Organization

Technical library ·

Fabrication of silicon ingot by CCCC method

B. M. Moon, D. S. Lee, B. H. Kim, J. S. Shin, and S. M. Lee

Abstract

In the fabrication process of multi-crystalline Si ingot for solar cell wafer, CCCC (Cold Crucible Continuous Casting) technology was practiced to prevent contamination from crucible wall as well as to overcome the problems of low solidification rate and crucible consumption. The effects of Joule heating and electromagnetic pressure in molten Si were systematically investigated with various processing parameters such as crucible configuration. Throughout the present investigation, multicrystalline Si ingot was successfully and continuously produced at the casting speed of above 1.5 mm/min under a non-contact condition between molten silicon and the crucible wall.