National representative in the World Foundry Organization

Technical library ·

Industrial application of thixoforming at SAG

Josef Wöhrer and Andreas Kraly

Abstract

SAG is a producer of thixoforming raw material for worldwide use at different producers of Semi Solid Metalforming serial parts. The SAG subsidiary Thixalloy® Components Company produces by itself complex designed Thixoforming parts in Alloy A356/A357 for different applications. The production of weldable structure parts and weldable pressure tight parts plays an important role as well as the production of surface treated parts for industrial use.

The customer benefits are tight dimensional tolerances, superior weldability with high process ability, good mechanical properties in the thixoformed condition with and without heat treatment, pressure tightness up to 80 bar after welding, good surface quality and good behaviour in plating.

Yield strengths of 200 MPa can be reached with a very cost efficient T5 heat treatment on TX 540 AlMg5Si2Mn or TX630 AlSi7Mg0.8. The so called Silicon Spheroidization Treatment (SST) is described which enables real parts to fulfil the high demands and to reach the values which are needed on suspension parts and wheels.

Additionally in this paper are shown parts which are produced with alloy type MAXXALLOY TX540 Al5Mg2Mn in Thixoforming. So Thixoforming works out as a more and more cost efficient process for Aluminum parts with high quality requirements.