The influence of heat treatment on the microstructure and tensile properties of the cast Ti-5111 alloy has been examined. The effects of annealing temperature and cooling rate on the microstructural evolution in this near-alpha alloy are assessed, and the relationships between microstructure and the corresponding tensile properties and fracture behavior are explored. The results indicate good strength in both the ascast condition and after six different heat treatments. The study also indicates heat treatments promoting a large prior beta grain size also result in an occasional low value of tensile ductility in which failure occurs due to crack initiation and growth.
Full paper (PDF)
PDF · 1.19 MB · Document in English
The full paper is available to members of the institute only.
Log in to downloadDetails
AuthorsA. C. Robinson, E. J. Czyryca, and D. A. Koss
Organisation1Naval Surface Warfare Center, Carderock Division, USA. 2The Pennsylvania State University, USA
Event67th World Foundry Congress
TopicHeat treatments
Document languageEnglish
Year2006