The significant features of closed cell aluminum foams are their low density, high energy absorption, etc. These characteristics are affected by the size of the foams, namely, the smaller the better. Generally, the low surface tension and the high viscosity of liquid metals can be appropriate for the production of fine metal foams. Therefore, it is necessary to study the effect of the viscosity on the stability of the foams. In this paper, the influence of the viscosity-increasing processes on the stability of the film was investigated using aqueous solutions. The viscosity increased by the addition of polyvinyl alcohol and ceramic powders. As a result, the longer lifetime of the film is found with the addition of good wettable particles than that of poor particles or polyvinyl alcohol.
Full paper (PDF)
PDF · 551.19 KB · Document in English
The full paper is available to members of the institute only.
Log in to downloadDetails
AuthorsKota Kadoi, Mitsukaze Tayama, Hideo Nakae
OrganisationMaterial Science and Engineering, Waseda University, Japan. 67th World Foundry Congress
TopicLight alloys
Document languageEnglish
Year2007