National representative in the World Foundry Organization

Technical library ·

Investigation on the flow pattern in the shot sleeve of the cold chamber HPDC process

Jun-Ho Hong, Young-Sim Choi, Ho-Young Hwang, Jeong-Kil Choi

Abstract

The cold chamber high pressure die casting process is one of the most general processes to make a lightweight material alloy casting. This process usually guarantees the short cycle times and good surface quality. However, the gas porosity defect appears easily in this process due to the air entrapment during the injection stage. The flow pattern of molten metal in the shot sleeve is closely related to the air entrapment. Generally, the flow patterns in the shot sleeve are concerned with the various plunger speeds and fill rate of molten metal. To investigate the mechanism of the gas porosity generations in the shot sleeve, the numerical simulation is introduced in this study. The numerical simulation results were shown good agreement with the experimental results using water model. From the comparison results, we conclude that the developed mathematical model for the flow pattern simulation in the shot sleeve of the cold chamber high pressure die casting process is useful to determine the proper condition of the plunger speed in some rage of the molten metal fill rate.