Mechanical properties and microstructural evolution of rheo-diecast (RDC) AZ91D alloy during heat treatment (HT) have been studied. The semi-solid processed alloy exhibits a unique solidification microstructure featuring the uniformly distributed primary a-Mg globules, the fine secondary a-Mg grains and the b-Mg17Al12 network. Compared with high-pressure die-cast AZ91D alloy, the RDC alloy displays a faster solution response and accelerated precipitation during HT. A new HT schedule Tx, has been developed, which was carried out at a temperature close to the solvus to break up the b-phase network. HT offers improvement to mechanical properties and the Tx treatment gives a superior combination of strength and ductility. The accelerated HT kinetics for the RDC alloy and the lower temperature and shorter time of the Tx indicate a considerable reduction in HT cost.
Full paper (PDF)
PDF · 649.43 KB · Document in English
The full paper is available to members of the institute only.
Log in to downloadDetails
AuthorsY. Wang, G. Liu and Z. Fan
OrganisationBrunel Centre for Advanced Solidification Technology (BCAST), Brunel University, UK
Event67th World Foundry Congress
TopicLight alloys
Document languageEnglish
Year2006