National representative in the World Foundry Organization

Technical library ·

The new method and device for fast evaluating inoculation result of eutectic Al-Si alloy

Li Dayong, Shi Dequan, Wang Lihua and Zhang Yutong

Abstract

Inoculation is a necessary step to produce high quality eutectic Al-Si alloy castings. Thermal analysis and metallographic observation methods have been being used to evaluate inoculation result of eutectic Al-Si alloy in real production, however they are unable to meet the requirement of real time monitoring in front of furnace because of their relative long measuring period. The authors put forward a new method to evaluate inoculation result of eutectic Al-Si alloy based on melt surface tension quick measurement. To blow the inert gas at appropriate speed into the melt through a capillary and form bubbles in the melt continuously. Then to test the pressure change in the bubbles and the melt temperature in 5 seconds duration with a computerised data acquisition device and to calculate the number and differential pressure of bubbles. The melt surface tension is calculated based on the number and the differential pressure of bubbles and some other parameters. Finally, the inoculation result of eutectic Al-Si alloy can be given by the device according to calculated melt surface tension.