National representative in the World Foundry Organization

Technical library ·

Mould filling in the lost foam casting of Al alloys

M. J. Ainsworth and W. D. Griffiths

Abstract

In the Lost Foam casting process the filling of vertically oriented plates was viewed using a real-time X-ray technique to examine the interaction of the cast Al with the polystyrene foam pattern. The plates were cast by means of a counter-gravity technique and bottom-gated running system. Real-time X-ray images showed that the advancing metal front was associated with the development of finger-like protrusions as mould filling velocity was increased. This inevitably led to the entrapment of the degradation products of the polystyrene pattern. Tensile properties of the plates showed a significant reduction when an unstable metal front was present during filling.

A similar type of instability was encountered during the displacement of liquid glucose by mercury in a Hele-Shaw cell. This analogue model of the process can be used to discover the conditions under which interface instability can occur in the Lost Foam casting process.