A novel aluminium matrix composite reinforced with a mixture of in-situ formed ZrB2, Al2O3 and Al3Zr particulates was synthesized using a magneto-chemical melt reaction. Using an electro-magnetic assisted melt reaction resulted in a uniform distribution of in-situ particles with no indication of clustering and an equivalent diameter in the range of 60 nm to 2 µm. Using this inexpensive in-situ manufacturing route, a composite with significantly enhanced mechanical properties was obtained. Increases of up to 50% in σuts and 70% in σy were obtained for an Al-4Cu based composite containing 15 vol% particulate in comparison to the unreinforced alloy. A negligible reduction in elongation was observed (from 5.4 to 4.9%). After a T6 heat treatment, σuts and σy showed further increases of 11% and 23%, respectively over the as-cast properties.
Full paper (PDF)
PDF · 423.83 KB · Document in English
The full paper is available to members of the institute only.
Log in to downloadDetails
AuthorsY. T. Zhao, Y. M. Youssef, R. W. Hamilton and P. D. Lee
Organisation* Jiangsu University, Zhenjiang, China, ** Imperial College of London, UK.
Event67th World Foundry Congress
Document languageEnglish
Year2006