Al-Mg/Al2O3 interpenetrating composites have been produced at atmospheric pressure by infiltrating 2-10 wt.% magnesium content Al-Mg alloys into 20% dense Al2O3 foams with highly interconnected porosity. The processing parameters of temperature, ≥900°C, and atmosphere, flowing N2-Ar, were investigated to determine the processing window and infiltration kinetics. In-situ observation of the process shows that infiltration is faster at higher temperatures, Mg contents and N2 partial pressures. Both optical and scanning electron microscopy (SEM) have been used to characterize the composites. Analysis using energy dispersive spectroscopy (EDS) has revealed that nitridation occurs in the composites with longer holding times at the processing temperature.
Full paper (PDF)
PDF · 629.90 KB · Document in English
The full paper is available to members of the institute only.
Log in to downloadDetails
AuthorsH. Chang, J. G. P. Binner, R. L. Higginson, R. Sambrook
Organisation*IPTME, Loughborough University, UK, **Hi-Por Ceramics Ltd, Sheffield, UK.
Event67th World Foundry Congress
Document languageEnglish
Year2006