Metal matrix composites are engineered materials formed by the combination of two or more dissimilar materials (at least one of which is a metal) to obtain enhanced properties. In the present investigation Al-4.5%Cu alloy was used as the matrix and fly ash & silicon carbide (SiC) as filler material. The composite was produced using conventional foundry techniques. The particulates were added in 5%, 10% and 15% by weight to the molten metal. The composite was tested for fluidity, hardness, density, mechanical properties and dry sliding wear. The microstructure examination was done using scanning electron microscope to know the distribution of particulates in the Al-4.5%Cu alloy matrix. The results show that there is an increase in hardness with increase in particulates content. The density decreases with increase in percentage of particulates. The tensile strength and compression strength increases with increase in percentage of particulates. The resistances to dry wear increases with increase in particulate content. The fracture surfaces were examined under SEM to know their behaviour.
Full paper (PDF)
PDF · 2.03 MB · Document in English
The full paper is available to members of the institute only.
Log in to downloadDetails
AuthorsMahendra K. V. and Dr. K. Radhakrishna
Organisation*New Horizon College of engineering, Bangalore, Ind.**B.M.S. College of engineering, Bangalore, Ind
Event67th World Foundry Congress
Document languageEnglish
Year2006