Investment casting is a time-consuming, labour intensive process, which can produce complex, high value-added components for a variety of specialised industries. Drying and strength-development of each coat during shell mould production is the most significant rate-limiting factor in the reduction of lead times and production costs for industry. As such, improvements which reduce cost and cycle times, open up new opportunities for product development.
A new shell build technique using a super absorbent polymer additive has been developed for mould production, such that moisture removal is not required to cause binder gellation for each individual mould coating. Therefore the drying time before a subsequent coat can be applied is dramatically reduced. All coats can be applied using the same novel additive thus leading to a large cumulative saving in overall mould processing time. This technology may allow the industry to successfully compete for the first time with other high volume forming methods as the traditional barrier of long processing times will be reduced. This paper introduces the technique, details shell development and results and follows the process through various iterations to the final proven concept.