National representative in the World Foundry Organization

Technical library ·

The significance of total carbon in greensand systems

Alexander Brown

Abstract

The need for control of raw materials is critical to the success of iron casting production from greensand systems. The base silica sand is often overlooked with the main focus on bentonite additions. Carbonaceous additives can be considered a “necessary evil” to ensure a good surface finish and reduction in sand related surface defects. Other additives are used when systems get out of balance and these in turn add further to the complex nature of greensand systems.

For castings requiring cores this becomes a bigger issue, as many differing resin systems are employed for core production and these must be taken into consideration when controlling both the carbonaceous levels and the overall grading of the sand system.

Possible changes on the loss on ignition properties and the effect on the carbon level needs careful understanding and control.

Various test methods are discussed including volatile and loss on ignition (LoI), and control methods such as total carbon are reviewed. The quality of additives and their role and more importantly their interaction is highlighted, as this is an area often neglected as foundrymen battle for success to produce consistent quality castings. The use of automatic mill control has simplified the production of usable moulding sand but this cannot replace the correct balance of additives and having sand at the mill, prior to additions, in the optimum condition Also reviewed is the interpretation of results and the action required to ensure control for consistent quality castings from greensand systems, with the focus on the use and understanding of carbonaceous additive on casting performance.