National representative in the World Foundry Organization

Technical library ·

A technological advantage for the environmental age

L. R. Horvath

Abstract

In today’s world of the environmentally conscious foundryman, technological progress is required to reduce waste, energy use and scrap rates. As foundries are forced to turn away from solvent-based products due to volatile organic compounds (VOC) and exposure limits, waterbased products continue to grow as the consumables of choice.

Significant progress has recently been made to address the current and future needs of foundries struggling to compete in a global casting market. Refractory coatings are currently a necessity for making saleable castings in most metals. They can have several benefits: eliminating metal penetration, veining defects and improving casting surface finish. All refractory coatings must be thoroughly dried after application. No-bake and jobbing foundries have traditionally used solvent-based refractory coatings because they are typically air-dried, ignited or torch-dried. There was no need for expensive ovens or the high cost of running and maintaining this equipment. Currently, there is a shift from solvent-based coatings to water-based coatings for both environmental and safety reasons.

The main problem foundrymen face when using a water-based coating is complete drying and how to determine when the coating is thoroughly dried. A new coating technology that shows a complete color change as it transitions from wet to dry phases has recently been developed. A diagnostic indicator that visually shows exactly when the foundrymen can close and pour the mold is invaluable. Other advantages of this technology are reduced cycle times, lower oven temperatures (energy savings) and lower scrap rates caused by moistures related defects (namely blows and porosity). An additional feature of the coating is recognition of mold and core density gradients.

As foundries are continuing to move towards water-based coatings to satisfy environmental regulations and safety requirements, technological advances are imperative in order to meet these challenges while, at the

same time, improving process efficiencies.