The applicability of titanium matrix composites (TMCs) sleeve for Al alloys die-casting was investigated by interfacial reaction, and wear and mechanical test. (TiC +TiB) reinforced TMCs were in-situ synthesized and net-shape formed using a horizontal vacuum induction melting system. The resistance-ability of (TiC+TiB) reinforced TMCs to molten Al alloys attack was also examined. Their reactions were carried out in a furnace at 993 K for times varying from 0 to 1200 s. In the case of conventional sleeve material, H13 steel, there were severe interfacial reactions and erosion after 60 s. On the other hand, the resistance of TMCs to interfacial reactions and erosion by molten A380 alloy was significantly increased. Moreover, the results of wear and mechanical properties of TMCs met all requirements for Al alloys die-casting shot sleeves.
Full paper (PDF)
PDF · 746.66 KB · Document in English
The full paper is available to members of the institute only.
Log in to downloadDetails
AuthorsSi-Young Sung, Bong-Jae Choi and Young-Jig Kim
OrganisationSungkyunkwan University, Suwon, Korea
Event67th World Foundry Congress
TopicEngineering
Document languageEnglish
Year2006